AEMS Killflash

from $40.00

Island Design and Manufacturing x Low Light Experiences bring you:

The Holosun AEMS Killflash! Completely designed and manufactured in the United States, the AEMS Killflash is the best way to cut down on the reflective signature of your optic.

Now also offering a killflash for the AEMS CORE at $40 USD!

Specs:

  • Made using Multi-Jet Fusion, out of Nylon 12 plastic

  • Direct, drop-in replacement of the original window

  • Secure fit from friction on the inside the body of the optic, as well as the tab on the top

  • Indent present on the top so it can be manually opened with a spare round if the tab should ever fail

  • Minimal reduction of light transmission (night vision compatible)

  • Extra large hole in the center for increased dot clarity, light transmission and ease of downrange/target focusing

Contents Include:

The “window” piece of the killflash, the “hinge” piece of the killflash, 2 replacement bolts, mini screwdriver

Not Included:

Replacement springs, replacement hinge pin

Notes:

The included hardware is a direct replacement, and only included in case you should lose the original hardware. Using the hardware we include is completely optional, not required. The lower “hinge” piece is interchangeable with the original, which one you use is completely up to you

When installing, ensure that the “hinge” piece is positioned to the front of the spring arms. Ensure that the springs are inserted completely. The spring arm that protrudes from the body might need slight tension on it to be set on the lip. The spring should not protrude further than the outside edge/side of the killflash. When inserting the “hinge” piece, start with the bottom side first, then rock the top side in. The killflash must be left in an “open” position while the bolts that secure it are driven in. 

All killflashes are hand-finished to be brought within spec, but some customers might require minor additional sanding for a truly perfect fit for their optic. We strive for perfection, so if you have any feedback, questions, or would like to send a review/pictures, please do! LowLightEx@gmail.com

Note: currently, Low Light Experiences functions primarily as a separate guiding service, and as a storefront for this product. This may be subject to change in the future, with products being sold under a different company. Products are made in batches, and will be shipped out 2x per week.

Type:
Quantity:
Add To Cart

Island Design and Manufacturing x Low Light Experiences bring you:

The Holosun AEMS Killflash! Completely designed and manufactured in the United States, the AEMS Killflash is the best way to cut down on the reflective signature of your optic.

Now also offering a killflash for the AEMS CORE at $40 USD!

Specs:

  • Made using Multi-Jet Fusion, out of Nylon 12 plastic

  • Direct, drop-in replacement of the original window

  • Secure fit from friction on the inside the body of the optic, as well as the tab on the top

  • Indent present on the top so it can be manually opened with a spare round if the tab should ever fail

  • Minimal reduction of light transmission (night vision compatible)

  • Extra large hole in the center for increased dot clarity, light transmission and ease of downrange/target focusing

Contents Include:

The “window” piece of the killflash, the “hinge” piece of the killflash, 2 replacement bolts, mini screwdriver

Not Included:

Replacement springs, replacement hinge pin

Notes:

The included hardware is a direct replacement, and only included in case you should lose the original hardware. Using the hardware we include is completely optional, not required. The lower “hinge” piece is interchangeable with the original, which one you use is completely up to you

When installing, ensure that the “hinge” piece is positioned to the front of the spring arms. Ensure that the springs are inserted completely. The spring arm that protrudes from the body might need slight tension on it to be set on the lip. The spring should not protrude further than the outside edge/side of the killflash. When inserting the “hinge” piece, start with the bottom side first, then rock the top side in. The killflash must be left in an “open” position while the bolts that secure it are driven in. 

All killflashes are hand-finished to be brought within spec, but some customers might require minor additional sanding for a truly perfect fit for their optic. We strive for perfection, so if you have any feedback, questions, or would like to send a review/pictures, please do! LowLightEx@gmail.com

Note: currently, Low Light Experiences functions primarily as a separate guiding service, and as a storefront for this product. This may be subject to change in the future, with products being sold under a different company. Products are made in batches, and will be shipped out 2x per week.

Island Design and Manufacturing x Low Light Experiences bring you:

The Holosun AEMS Killflash! Completely designed and manufactured in the United States, the AEMS Killflash is the best way to cut down on the reflective signature of your optic.

Now also offering a killflash for the AEMS CORE at $40 USD!

Specs:

  • Made using Multi-Jet Fusion, out of Nylon 12 plastic

  • Direct, drop-in replacement of the original window

  • Secure fit from friction on the inside the body of the optic, as well as the tab on the top

  • Indent present on the top so it can be manually opened with a spare round if the tab should ever fail

  • Minimal reduction of light transmission (night vision compatible)

  • Extra large hole in the center for increased dot clarity, light transmission and ease of downrange/target focusing

Contents Include:

The “window” piece of the killflash, the “hinge” piece of the killflash, 2 replacement bolts, mini screwdriver

Not Included:

Replacement springs, replacement hinge pin

Notes:

The included hardware is a direct replacement, and only included in case you should lose the original hardware. Using the hardware we include is completely optional, not required. The lower “hinge” piece is interchangeable with the original, which one you use is completely up to you

When installing, ensure that the “hinge” piece is positioned to the front of the spring arms. Ensure that the springs are inserted completely. The spring arm that protrudes from the body might need slight tension on it to be set on the lip. The spring should not protrude further than the outside edge/side of the killflash. When inserting the “hinge” piece, start with the bottom side first, then rock the top side in. The killflash must be left in an “open” position while the bolts that secure it are driven in. 

All killflashes are hand-finished to be brought within spec, but some customers might require minor additional sanding for a truly perfect fit for their optic. We strive for perfection, so if you have any feedback, questions, or would like to send a review/pictures, please do! LowLightEx@gmail.com

Note: currently, Low Light Experiences functions primarily as a separate guiding service, and as a storefront for this product. This may be subject to change in the future, with products being sold under a different company. Products are made in batches, and will be shipped out 2x per week.