AEMS CORE Killflash
Island Design and Manufacturing x Low Light Experiences bring you:
The Holosun AEMS Core Killflash! Completely designed and manufactured in the United States, the AEMS Core Killflash is the best way to cut down on the reflective signature of your optic.
Specs:
Made using Multi-Jet Fusion, out of Nylon 12 plastic
Direct, drop-in replacement of the original window
Minimal reduction of light transmission (night vision compatible)
Extra large hole in the center for increased dot clarity, light transmission and ease of downrange/target focusing
Contents Include:
The “window” piece of the killflash, 2 replacement bolts, mini screwdriver
Notes:
The included hardware is a direct replacement, and only included in case you should lose the original hardware. Using the hardware we include is completely optional, not required.
To install, remove the original hardware with the supplied Torx driver, then pry out and remove the original face of the optic. Insert the killflash and ensure that all corners and sides are fully seated. Re-install the two torx-headed bolts.
All killflashes are hand-finished to be brought within spec, but some customers might require minor additional sanding for a truly perfect fit for their optic. We strive for perfection, so if you have any feedback, questions, or would like to send a review/pictures, please do! LowLightEx@gmail.com
Note: currently, Low Light Experiences functions primarily as a separate guiding service, and as a storefront for this product. This may be subject to change in the future, with products being sold under a different company. Products are made in batches, and will be shipped out 2x per week.
Island Design and Manufacturing x Low Light Experiences bring you:
The Holosun AEMS Core Killflash! Completely designed and manufactured in the United States, the AEMS Core Killflash is the best way to cut down on the reflective signature of your optic.
Specs:
Made using Multi-Jet Fusion, out of Nylon 12 plastic
Direct, drop-in replacement of the original window
Minimal reduction of light transmission (night vision compatible)
Extra large hole in the center for increased dot clarity, light transmission and ease of downrange/target focusing
Contents Include:
The “window” piece of the killflash, 2 replacement bolts, mini screwdriver
Notes:
The included hardware is a direct replacement, and only included in case you should lose the original hardware. Using the hardware we include is completely optional, not required.
To install, remove the original hardware with the supplied Torx driver, then pry out and remove the original face of the optic. Insert the killflash and ensure that all corners and sides are fully seated. Re-install the two torx-headed bolts.
All killflashes are hand-finished to be brought within spec, but some customers might require minor additional sanding for a truly perfect fit for their optic. We strive for perfection, so if you have any feedback, questions, or would like to send a review/pictures, please do! LowLightEx@gmail.com
Note: currently, Low Light Experiences functions primarily as a separate guiding service, and as a storefront for this product. This may be subject to change in the future, with products being sold under a different company. Products are made in batches, and will be shipped out 2x per week.
Island Design and Manufacturing x Low Light Experiences bring you:
The Holosun AEMS Core Killflash! Completely designed and manufactured in the United States, the AEMS Core Killflash is the best way to cut down on the reflective signature of your optic.
Specs:
Made using Multi-Jet Fusion, out of Nylon 12 plastic
Direct, drop-in replacement of the original window
Minimal reduction of light transmission (night vision compatible)
Extra large hole in the center for increased dot clarity, light transmission and ease of downrange/target focusing
Contents Include:
The “window” piece of the killflash, 2 replacement bolts, mini screwdriver
Notes:
The included hardware is a direct replacement, and only included in case you should lose the original hardware. Using the hardware we include is completely optional, not required.
To install, remove the original hardware with the supplied Torx driver, then pry out and remove the original face of the optic. Insert the killflash and ensure that all corners and sides are fully seated. Re-install the two torx-headed bolts.
All killflashes are hand-finished to be brought within spec, but some customers might require minor additional sanding for a truly perfect fit for their optic. We strive for perfection, so if you have any feedback, questions, or would like to send a review/pictures, please do! LowLightEx@gmail.com
Note: currently, Low Light Experiences functions primarily as a separate guiding service, and as a storefront for this product. This may be subject to change in the future, with products being sold under a different company. Products are made in batches, and will be shipped out 2x per week.